Fax 866-902-9949
  Skip Navigation Links.
  Skip Navigation LinksHome > KMC Controls > Electric Actuators > Obsolete_Actuators > MEP-1262

KMC MEP-1262 Direct Coupled Modulating ControlSet Actuator

Previous Page

Obsolete Use Mep-7200 Series

The KMC MEP-1262 ControlSet actuator is designed to regulate large control air dampers and valves in HVAC systems. It is controlled by a 2-10 VDC signal (4-20 mA with 500 ohm resistor) from a thermostat, controller, or building automation system. A 1-5 VDC feed-back voltage output is provided which is proportional to the control signal. The actuator mounts directly to 3/8" up to 3/4" diameter, or 5/16" up to 9/16" square, shaft eliminating the need for expensive and complicated linkages. A minimum 100 in-lb. of torque is available over the 90° angular rotation. A gear dis-engagement feature allows positioning of the damper and/or gear train without energizing the actuator. Protected against overloading, the actuator does not require end or limit switches.

Accessories are available:

HMO-4517 Front mounting backplate
HMO-4518 Snap-in connector for 1/2" flexible metal conduit
HMO-4519 Non-rotation bracket
HMO-4520 Connector for plenum cable
HMO-4526 Female connector for 1/2" conduit
HMO-4528 Replacement (V) bolt and nuts
VTD-0804 Ball joint
VTD-1404 Short crankarm
VTD-1405 Long crankarm



Please Sign in for personalized information.

Customer Sign In

Part Number: