Phone
615-391-5278
Fax 866-902-9949
info@hvacdigital.com
 
  Skip Navigation Links.
  Skip Navigation LinksHome > KMC Controls > Electric Actuators > Obsolete_Actuators > MEP-1272

KMC MEP-1272 Direct Coupled, Modulating, Failsafe, ControlSet Actuator

Previous Page


Obsolete Use Mep-7200 Series

The KMC MEP-1272 ControlSet actuator is designed to regulate large control air dampers and valves in HVAC systems. It is controlled by a 2-10 VDC signal (4-20 mA with 500 ohm resistor) from a thermostat, controller, or building automation system. A 1-5 VDC feedback voltage output, which is proportional to the control signal, is provided. The actuator mounts directly to 3/8" up to 3/4" diameter, or 5/16" up to 9/16" square, shafts eliminating the need for expensive and complicated linkage. A minimum 100 in-lb. of torque is available over the 90 deg angular rotation. A gear disengagement feature allows positioning of the damper and/ or gear train without power. Protected against overloading, the actuator does not require end or limit switches. The fail safe feature allows selection of the return direction and a delay allows a full charge before normal operation resumes.

Accessories are available:


HMO-4517 Front mounting backplate
HMO-4518 Snap-in connector for 1/2" flexible metal conduit
HMO-4519 Non-rotation bracket
HMO-4520 Connector for plenum cable
HMO-4526 Female connector for 1/2" conduit
HMO-4528 Replacement V bolt and nuts
VTD-0804 Ball joint
VTD-1404 Short crankarm
VTD-1405 Long crankarm

 

 
STE-1416


Please Sign in for personalized information.

                 
  
Customer Sign In
 
 
Register

Part Number:

Description: