Fax 866-902-9949
  Skip Navigation LinksHome > KMC Controls > Electric Actuators > MEP-5000 Series

KMC MEP-5000 Series Direct Magnetic Coupled Tri-State ControlSet Actuator

Previous Page

The KMC MEP-5000 series 3-wire ControlSet Actuators are designed to control small dampers such as air terminal unit dampers or VEP-40 series valves.

The MEP-5061 is an 18°/minute actuator and the MEP-5071 is a 60°/minute actuator.

The actuator mounts to a 1/2" or 3/8" diameter damper shaft, eliminating the need for expensive and complicated linkages. When mounting to a 3/8" diameter shaft, the HFO-0011 shaft adaptor is required and must be ordered separately.

These bidirectional motors may be controlled via an SPDT floating thermostat or building automation system. A minimum of 50 in-lb of torque over the maximum angular rotation of 95° is provided. Both minimum and maximum end stops are standard to limit the rotation. A gear disengagement feature allows positioning of the damper and/or gear train without energizing the actuator. An optional feedback potentiometer and/or a single, double or triple auxiliary switch can be field added.

Accessories are available:

CME-1002 Single auxiliary switch
CME-1004 Double auxiliary switch
CME-1006 Triple auxiliary switch
CME-2003 3-wire potentiometer, 10 K ohm, 1/3 watt
HFO-0011 3/8" shaft adaptor
HMO-4518 Connector for 1/2" flexible metal conduit
HMO-4520 Compression connector for plenum cable
HMO-4526 Female connector for 1/2" conduit



Please Sign in for personalized information.

Customer Sign In

Part Number: