Phone
615-391-5278
Fax 866-902-9949
info@hvacdigital.com
 
  Skip Navigation Links.
  Skip Navigation LinksHome > KMC Controls > Electric Actuators > Obsolete_Actuators > MEP-5062 MEP-5072

KMC MEP-5062, 5072 Direct Magnetic Coupled Modulating ControlSet Actuator

Previous Page

Obsolete Actuator

 

The KMC MEP-5062/5072 ControlSet Actuators are designed to control small dampers or specific VEP series valves. The MEP-5062 is an 18°/minute actuator and the MEP-5072 is a 60°/minute actuator. The actuators mount directly to a 1/2" or 3/8" diameter shaft, eliminating the need for expensive and complicated linkage. Mounting to a 3/8" diameter shaft requires the HFO-0011 shaft adaptor (ordered separately). The actuator may be controlled via a 2 to 10 VDC control signal from a thermostat, controller or building automation system. A minimum of 50 in-lb. of torque is provided over the maximum angular rotation of 95°. The units are factory calibrated for 2 to 10 VDC input signal (4 to 20 mA with 500 ohm resistor) and 95° clockwise rotation. Counter-clockwise rotation is obtained by simply toggling a switch. A 1 to 5 VDC feedback voltage, proportional to the feedback signal, is provided. This feedback can be used for remote indication of damper position. An 18 VDC auxiliary power supply output is also supplied to power other control devices in the system. Minimum and maximum end stops are standard to limit the rotation. A gear disengagement feature allows positioning of the actuator without power. An optional single, double or triple auxiliary switch can be field installed.


Accessories are available:

 

CME-1002 Single auxiliary switch
CME-1004 Double auxiliary switch
CME-1006 Triple auxiliary switch
HFO-0011 3/8" shaft adaptor
HMO-4518 Connector for 1/2" flexible metal conduit
HMO-4520 Compression connector for plenum cable
HMO-4526 Female connector for 1/2" conduit

 

 
HP1NMSTF


Please Sign in for personalized information.

                 
  
Customer Sign In
 
 
Register

Part Number:

Description: