Phone
615-391-5278
Fax 866-902-9949
info@hvacdigital.com
 
  Skip Navigation Links.
  Skip Navigation LinksHome > KMC Controls > Electric Actuators > Obsolete_Actuators > MEP-5372

KMC MEP-5372 Direct Coupled, Modulating Fail-Safe ControlSet Actuator

Previous Page

The KMC MEP-5372 ControlSet Actuator is designed to control small dampers or specific VEP series valves. The actuator mounts directly to a 1/2" or 3/8" diameter shaft, eliminating the need for expensive and complicated linkages. Mounting to a 3/8" diameter shaft requires the HFO-0011 shaft adaptor (ordered separately). The actuator may be controlled via a 2 to 10 VDC control signal from a thermostat, controller or building automation system. A minimum of 50 in-lb. of torque is provided over the maximum angular rotation of 95°. Actuators are factory calibrated for 2 to 10 VDC input signal (4 to 20 mA with 500 ohm resistor) and 95° clockwise rotation. A 1 to 5 VDC feedback voltage output, proportional to the control signal, is provided. This feedback can be used for remote indication of damper position. An 18 VDC auxiliary power supply output is provided to power CTE-5100 series thermostats or other system control devices. Minimum and maximum end stops are standard to limit rotation. A gear disengagement feature allows positioning of the actuator without power. An optional single, double or triple auxiliary switch can be field installed.

Accessories:

CME-1002 Single auxiliary switch
CME-1004 Double auxiliary switch
CME-1006 Triple auxiliary switch
HFO-0011 3/8" shaft adaptor
HMO-4518 Connector for 1/2" flexible metal conduit
HMO-4520 Compression connector for plenum cable
HMO-4526 Female connector for 1/2" conduit

 

 
ACI-SCTA-50


Please Sign in for personalized information.

                 
  
Customer Sign In
 
 
Register

Part Number:

Description: