Fax 866-902-9949
  Skip Navigation Links.
  Skip Navigation LinksHome > KMC Controls > Electric Actuators > Obsolete_Actuators > MEP-7061/7063/7761/7763

KMC MEP-7061 7063 7761 7763 Direct Coupled Fail-safe, Tri-State ControlSet Actuators 150/300 Inch-Pound

Previous Page

Obsolete Use Mep-7500 Series  Mep-7800 Series


The KMC MEP-7061/7063/7761/7763 fail-safe ControlSet Actuators are designed to regulate large control air dampers and valves in HVAC systems. The 7061 and 7761 have 3-wire floating control signal inputs, and the 7063 and 7763 have 3-wire floating control signal inputs with an added feedback potentiometer output. These actuators mount directly to 3/8" up to 1.05" round or 5/16" up to 5/8" square shafts, eliminating the need for expensive and complicated linkage. The bidirectional motors may be controlled via a SPDT floating thermostat, controller, or building automation system. A minimum 150 in-lb of torque is available on the 7060 series and a minimum 300 in-lb of torque is available on the 7760 series over the 94o angular rotation. A gear disengagement feature allows positioning of the damper and/or gear train without energizing the actuator. The actuators are protected against overloading and do not require end or limit switches.

The fail-safe feature allows selection for the direction of return, and a delay allows a full charge before normal operation is resumed.

Accessories are available:

CME-7001 Single Auxiliary Switch
CME-7002 Dual Auxiliary Switch
HMO-4535 Non-rotational bracket
HMO-4536 Stop Kit
HLO-1020 Crank arm Kit
HCO-1152 Weather Shield Kit



Please Sign in for personalized information.

Customer Sign In

Part Number: