Phone
615-391-5278
Fax 866-902-9949
info@hvacdigital.com
 
  Skip Navigation Links.
  Skip Navigation LinksHome > KMC Controls > Electric Actuators > Obsolete_Actuators > MEP-7062 MEP-7762

KMC MEP-7062, 7762 Direct Coupled, Fail-safe, Proportional ControlSet Actuators 150/300 Inch-Pound

Previous Page

Obsolete Use Mep-7500 Series  Mep-7800 Series

 

The KMC MEP-MEP-7062/7762 fail-safe ControlSet Actuators are designed to regulate large control air dampers and valves in HVAC systems. Both accept a 2-10 VDC or 4-20 mA control signal input from a thermostat, controller, or building automation system. A 1-5 VDC feedback voltage output is provided which is proportional to the control signal. These actuators mount directly to 3/8" up to 1.05" round or 5/16" up to 5/8" square shafts, eliminating the need for expensive and complicated linkage. A minimum 150 in-lb of torque is available on the 7062 and a minimum 300 in-lb of torque is available on the 7762 over the 94o angular rotation. A gear disengagement feature allows positioning of the damper and/or gear train without energizing the actuator. The actuators are protected against overloading and do not require end or limit switches. The fail-safe feature allows selection for the direction of return, and a delay allows a full charge before normal operation is resumed.

Accessories are available:

CME-7001 Single Auxiliary Switch
CME-7002 Dual Auxiliary Switch
HMO-4535 Non-rotational bracket
HMO-4536 Stop Kit
HLO-1020 Crank arm Kit
HCO-1152 Weather Shield Kit

 

 
SC12106


Please Sign in for personalized information.

                 
  
Customer Sign In
 
 
Register

Part Number:

Description: