Phone
615-391-5278
Fax 866-902-9949
info@hvacdigital.com
 
  Skip Navigation Links.
  Skip Navigation LinksHome > KMC Controls > Electric Actuators > Obsolete_Actuators > MEP-7200 Series

KMC MEP-7200 Series Direct-Coupled, ControlSet Actuators 120 in-lbs.

Previous Page

MEP-7200 SERIES IS OBSOLETE, THIS PAGE IS FOR REPLACEMENT REFFERENCES ONLY These powerful, durable, direct-coupled actuators provide tri-state or proportional control for large control air dampers or valves in HVAC systems. A minimum torque of 120, 180, or 320 in-lbs. is available over the 94o angular rotation.

The proportional actuator models accept a 0-10 VDC or 4-20 mA control signal input from a thermostat, controller, or building automation system. A user-initiated, auto-mapping feature provides better equipment control by reassigning the 0-10 VDC input signal range over a reduced rotation range (from 45o to 94°). These models also feature a switch-selectable, 0-5 or 0-10 VDC voltage feedback output that is proportional to the actuator position.

The tri-state models are designed for use with floating thermostats, controllers, or building automation systems. They feature a 10,000 ohm (+/- 10%), three-wire potentiometer feedback output.

All actuators mount directly on 3/8" up to 1.05" round or 5/16" up to 5/8" square shafts, eliminating the need for expensive and complicated linkages. A non-rotation bracket, to prevent lateral movement, is included with each actuator. A gear disengagement button allows manual positioning of the damper and/or gear train without energizing the actuator. The actuators are protected against overloading and do not require end or limit switches.



 

 
BAC-141136CEW


Please Sign in for personalized information.

                 
  
Customer Sign In
 
 
Register

Part Number:

Description: