Phone
615-391-5278
Fax 866-902-9949
info@hvacdigital.com
  Skip Navigation LinksHome > KMC Controls > Electric Actuators > MEP-7800 Series

KMC MEP-7800 Series Direct-Coupled, ControlSet Actuators 320 in-lbs.

Previous Page

These powerful, durable, direct-coupled actuators provide tri-state or proportional control for large control air dampers or valves in HVAC systems. A minimum torque of 120, 180, or 320 in-lbs. is available over the 94o angular rotation.

The proportional actuator models accept a 0-10 VDC or 4-20 mA control signal input from a thermostat, controller, or building automation system. A user-initiated, auto-mapping feature provides better equipment control by reassigning the 0-10 VDC input signal range over a reduced rotation range (from 45o to 94o). These models also feature a switch-selectable, 0-5 or 0-10 VDC voltage feedback output that is proportional to the actuator position.

The tri-state models are designed for use with floating thermostats, controllers, or building automation systems. They feature a 10,000 ohm (+/- 10%), three-wire potentiometer feedback output.

All actuators mount directly on 3/8" up to 1.05" round or 5/16" up to 5/8" square shafts, eliminating the need for expensive and complicated linkages. A non-rotation bracket, to prevent lateral movement, is included with each actuator. A gear disengagement button allows manual positioning of the damper and/or gear train without energizing the actuator. The actuators are protected against overloading and do not require end or limit switches.



 

 
TER10


Please Sign in for personalized information.

                 
  
Customer Sign In
 
 
Register

Part Number:

Description: