Fax 866-902-9949
  Skip Navigation LinksHome > KMC Controls > Special Sensors > SAE-1001

KMC SAE-1001 (1002 w/ LCD, relay) Space CO2 Sensor 0-2000 ppm 5% accuracy

Previous Page

Discontinued The SAE-1000 series detectors are designed to sense and transmit CO2 levels to any compatible electronic analog control or DDC automation system for the control of ventilation equipment in industrial and commercial applications. Such information is crucial to demand controlled ventilation that ensures adequate indoor air quality while minimizing the energy costs of conditioning outside air.

These self-calibrating detectors use the sensor's onThese self-calibrating detectors use the sensor's on-board microprocessor to remember the lowest CO2 concentration measured in a 24 hour period. The sensor assumes this low point is at outside levels. (The smart sensor discounts periodic elevated readings that might occur if, for example, a space was used 24 hours per day over a few days.) After collecting 14 days worth of low concentration points, the sensor performs a statistical analysis comparing sensor readings to background levels. If there have been any small changes that could be attributable to sensor drift, a small correction factor is made to the sensor calibration to adjust for this change. If a space does not experience a periodic drop to outside levels (e.g. where occupancy is 24 hours, 7 days/week), the self-calibration software should be deactivated. If the software has been deactivated (via menu buttons), calibration may be required every two to three years.

The SAE-1000 series is designed to meet ventilation requirements specified in the ASHRAE Standard 62.1-2007 Ventilation for Acceptable Indoor Air PPM level and menu options

  • Monitors CO2 over range 0 to 2000 PPM (factory default
  • Field adjustable range from 0 to 1500 PPM up to 10,000 PPM without re-calibration!
  • NDIR single beam with a patented self- calibration algorithm
  • Optional on board relay with field adjustable trip point
  • Setup/calibration fully menu driven (SAE-1002 only)
  • Powered by either AC or DC source with no change to circuit required
  • Choice of two field adjustable analog output signals, linearized over full range



Please Sign in for personalized information.

Customer Sign In

Part Number: